Micro Air Logo
Micro Air Logo

RP8-2 ducted to plasma cutting table collects harmful smoke and fumes generated in cutting process.

MC2500, equipped with dual source capture arms is used for source capture of laser cutting smoke. Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


MC2500, equipped with dual source capture arms is used for source capture of laser cutting smoke.

A Canopy hood system with side curtains insures the containment of laser smoke. The ducted Micro Air unit then filters the air and returns the cleaned air back into the workpl Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


A Canopy hood system with side curtains insures the containment of laser smoke. The ducted Micro Air unit then filters the air and returns the cleaned air back into the workplace.

Side mounted spark arrestor on RP8 dust collector reduces risk of fire from hot sparks generated in the cutting operation Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


Side mounted spark arrestor on RP8 dust collector reduces risk of fire from hot sparks generated in the cutting operation

RP8-2, 16 cartridge dust collector, equipped with dual in-line 4000CFM spark arrestors, and ducted to hood over laser cutting table, effectively removes cutting smoke and fume Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


RP8-2, 16 cartridge dust collector, equipped with dual in-line 4000CFM spark arrestors, and ducted to hood over laser cutting table, effectively removes cutting smoke and fumes.

Micro Air dust collector installed outdoors and ducted to hooded laser cutting tables leaves entire building free of laser smoke and fumes. Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


Micro Air dust collector installed outdoors and ducted to hooded laser cutting tables leaves entire building free of laser smoke and fumes.

Micro Air MC2500, dual filter module, with source capture arms on each module, collects smoke and fumes generated in a plasma tube profiling process. Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


Micro Air MC2500, dual filter module, with source capture arms on each module, collects smoke and fumes generated in a plasma tube profiling process. With one arm positioned over the stationary plasma profiling operation and one arm positioned at the end of the tube, smoke and fumes generated in the process are effectively captured.

RP8-2, low profile, with spark arrestor mounted to side of collector, and ducted to plasma cutting table, effectively and safely removes smoke and fumes generated in the cutti Plasma/Laser Cutting Applications
Plasma/Laser Cutting Applications


RP8-2, low profile, with spark arrestor mounted to side of collector, and ducted to plasma cutting table, effectively and safely removes smoke and fumes generated in the cutting process.

preloada0 preloadb0 preloada1 preloadb1 preloada2 preloadb2 preloada3 preloadb3 preloada4 preloadb4 preloada5 preloadb5 preloada6 preloadb6 preloada7 preloadb7