Micro Air - Laser and Plasma Cutting | Smoke and Fume Extraction

MC2500, equipped with dual source capture arms is used for source capture of laser cutting smoke.

A Canopy hood system with side curtains insures the containment of laser smoke. The ducted Micro Air unit then filters the air and returns the cleaned air back into the workplace.

Side mounted spark arrestor on RP8 dust collector reduces risk of fire from hot sparks generated in the cutting operation

RP8-2, 16 cartridge dust collector, equipped with dual in-line 4000CFM spark arrestors, and ducted to hood over laser cutting table, effectively removes cutting smoke and fumes.

Micro Air dust collector installed outdoors and ducted to hooded laser cutting tables leaves entire building free of laser smoke and fumes.

Micro Air MC2500, dual filter module, with source capture arms on each module, collects smoke and fumes generated in a plasma tube profiling process. With one arm positioned over the stationary plasma profiling operation and one arm positioned at the end of the tube, smoke and fumes generated in the process are effectively captured.

RP8-2, low profile, with spark arrestor mounted to side of collector, and ducted to plasma cutting table, effectively and safely removes smoke and fumes generated in the cutting process.